| Drive Power |
Pillow Block Bearings |
| Drive Speed |
0.0 |
| Displacement, geometric, per revolution |
N/A |
| Torque |
14.528 |
| Load Pressure |
M06288 |
| Weight (approx.) |
4 |
| Maximum Volume Flow |
V Lock |
| Control Pressure Measurement |
4 Bolt Pillow Block |
| Rotary stiffness |
Spherical Roller Bearing |
| Maximum angular acceleration |
Cast Steel |
| Maximum Permissible Speed (limit Speed) |
Non-expansion |
| Flow |
5/8 Inch |
| Maximum Axial Force At Standstill |
Yes |
| Maximum Torque |
22217 |
| Maximum Permissible Pilot Pressure |
Double Lip Nitrile Rubber |
| Pressurefree Operation |
1 Piece Solid |
| Rate Of Pressure Change |
Inch |
| Sequence Valve |
Double Row | Single Nut | SAF Style |
| Control Fluid Drain |
4 Bolt Pillow Block; 2-15/16" Bore; 3-3/4" Base to Center Height; V Lock Mount; Spherical Roller Bearing; 9.44" Minimum Bolt Spacing; 11.31" Bolt Spacing Maximum; Relubricatable; C |
| Determining Operating Characteristics |
Pillow Block |
| Voltage |
31171511 |
| Moment of inertia rotary group |
8483.20.40.80 |
| Pilot Pressure |
Bearing |
| Power |
Pillow Block |
| Maximum rotational speed |
QVPH17V215SB |
| Weight / LBS |
32 |
| D |
3.33 Inch | 84.582 Millimeter |
| Bolt Spacing Minimum |
9.44 Inch | 239.776Millimeter |
| Bolt Spacing Maximum |
11.31 Inch | 287.274Millimeter |
| B |
3.75 Inch | 95.25 Millimeter |
| d |
2.938 Inch | 74.625 Millimeter |
| Actual Bolt Center to Center |
0 Inch | 0Millimeter |
| Nominal Bolt Center to Center |
10.4 Inch | 264.2 Millimeter |