| Rotary stiffness | 7005 ACE/HCP4AH1 |
| Power | 47x25x12 |
| Pressurefree Operation | 47 |
| Case volume | 25 |
| Displacement, geometric, per revolution | 12 |
| Moment of inertia rotary group | 25 mm |
| Weight (approx.) | 47 mm |
| Maximum Axial Force At Standstill | 12 mm |
| Determining Operating Characteristics | 31.6 mm |
| Maximum Permissible Speed (limit Speed) | 29.8 mm |
| Pilot Pressure | 39.21 mm |
| Maximum Volume Flow | 0.5 mm |
| Torque | 3.72 mm |
| Sequence Valve | 0.6 mm |
| Load Pressure | 0.3 mm |
| Rate Of Pressure Change | 14.4 mm |
| Voltage | 28.2 mm |
| Maximum Torque | 28.2 mm |
| Maximum angular acceleration | 43.8 mm |
| Maximum Permissible Pilot Pressure | 44.6 mm |
| Control Fluid Drain | 0.6 mm |
| Control Pressure Measurement | 0.3 mm |
| Drive Power | 33.1 mm |
| Maximum rotational speed | 7.9 kN |
| Flow | 3.9 kN |
| Drive Speed | 0.166 kN |
| Nominal Resistance | 50000 r/min |
| Limiting speed for oil lubrication | 75000 mm/min |
| Ball - Dw | 6.35 mm |
| Ball - z | 14 |
| Gref | 1.3 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 70 N |
| Preload class B - GB | 210 N |
| Preload class C - GC | 430 N |
| Calculation factor - f | 1.05 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.06 |
| Calculation factor - fHC | 1.01 |
| Preload class A | 66 N/micron |
| Preload class B | 98 N/micron |
| Preload class C | 130 N/micron |
| d1 | 31.6 mm |
| d2 | 29.8 mm |
| D1 | 39.21 mm |
| C1 | 3.72 mm |
| r1,2 min. | 0.6 mm |
| r3,4 min. | 0.3 mm |
| da min. | 28.2 mm |
| db min. | 28.2 mm |
| Da max. | 43.8 mm |
| Db max. | 44.6 mm |
| ra max. | 0.6 mm |
| rb max. | 0.3 mm |
| dn | 33.1 mm |
| Basic dynamic load rating C | 7.93 kN |
| Basic static load rating C0 | 3.9 kN |
| Fatigue load limit Pu | 0.166 kN |
| Attainable speed for grease lubrication | 50000 r/min |
| Attainable speed for oil-air lubrication | 75000 r/min |
| Ball diameter Dw | 6.35 mm |
| Number of balls z | 14 |
| Reference grease quantity Gref | 1.3 cm³ |
| Preload class A GA | 70 N |
| Static axial stiffness, preload class A | 66 N/µm |
| Preload class B GB | 210 N |
| Static axial stiffness, preload class B | 98 N/µm |
| Preload class C GC | 430 N |
| Static axial stiffness, preload class C | 130 N/µm |
| Calculation factor f | 1.05 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.06 |
| Calculation factor fHC | 1.01 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.065 kg |
R902415491 A10VO140DFR/31R-PSD51N00 imported with original packaging Original Rexroth A10VO Series Piston Pump
R902092245 A10VO140FHD/31R-PSD62K02 imported with original packaging Original Rexroth A10VO Series Piston Pump
R902101409 A10VO140DRG/31R-VSD62N00-SO808 imported with original packaging Original Rexroth A10VO Series Piston Pump
R909611019 A10VO140DRG/31R-VSD62K17-SO808 imported with original packaging Original Rexroth A10VO Series Piston Pump
R902092905 A10VO140DRG/31R-PSD62N00 imported with original packaging Original Rexroth A10VO Series Piston Pump
R902092829 A10VO140DRG/31R-PSD62K02-SO808 imported with original packaging Original Rexroth A10VO Series Piston Pump