| Weight (approx.) | 7001 ACE/P4AH |
| Maximum Torque | 28x12x8 |
| Rate Of Pressure Change | 28 |
| Torque | 12 |
| Case volume | 8 |
| Maximum Volume Flow | 12 mm |
| Rotary stiffness | 28 mm |
| Drive Power | 8 mm |
| Load Pressure | 17.5 mm |
| Maximum angular acceleration | 16.5 mm |
| Maximum rotational speed | 22.45 mm |
| Power | 0.5 mm |
| Sequence Valve | 4.9 mm |
| Control Pressure Measurement | 0.3 mm |
| Determining Operating Characteristics | 0.15 mm |
| Maximum Permissible Speed (limit Speed) | 8.8 mm |
| Pressurefree Operation | 14 mm |
| Drive Speed | 14 mm |
| Pilot Pressure | 26 mm |
| Voltage | 26.6 mm |
| Maximum Permissible Pilot Pressure | 0.3 mm |
| Control Fluid Drain | 0.15 mm |
| Displacement, geometric, per revolution | 18.5 mm |
| Moment of inertia rotary group | 3.1 kN |
| Maximum Axial Force At Standstill | 1.3 kN |
| Flow | 0.054 kN |
| Nominal Resistance | 73000 r/min |
| Limiting speed for oil lubrication | 112000 mm/min |
| Ball - Dw | 3.969 mm |
| Ball - z | 12 |
| Gref | 0.31 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 28 N |
| Preload class B - GB | 85 N |
| Preload class C - GC | 170 N |
| Calculation factor - f | 1.02 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.06 |
| Calculation factor - fHC | 1 |
| Preload class A | 34 N/micron |
| Preload class B | 50 N/micron |
| Preload class C | 66 N/micron |
| d1 | 17.5 mm |
| d2 | 16.5 mm |
| D1 | 22.45 mm |
| C1 | 4.9 mm |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.15 mm |
| da min. | 14 mm |
| db min. | 14 mm |
| Da max. | 26 mm |
| Db max. | 26.6 mm |
| ra max. | 0.3 mm |
| rb max. | 0.15 mm |
| dn | 18.5 mm |
| Basic dynamic load rating C | 3.07 kN |
| Basic static load rating C0 | 1.27 kN |
| Fatigue load limit Pu | 0.054 kN |
| Attainable speed for grease lubrication | 73000 r/min |
| Attainable speed for oil-air lubrication | 112000 r/min |
| Ball diameter Dw | 3.969 mm |
| Number of balls z | 12 |
| Reference grease quantity Gref | 0.31 cm³ |
| Preload class A GA | 28 N |
| Static axial stiffness, preload class A | 34 N/µm |
| Preload class B GB | 85 N |
| Static axial stiffness, preload class B | 50 N/µm |
| Preload class C GC | 170 N |
| Static axial stiffness, preload class C | 66 N/µm |
| Calculation factor f | 1.02 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.06 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.021 kg |
PV040L1D3BBVMR1 Piston pump PV040 series imported with original packaging Parker
PV040R1D3BBNMRZ+PVAC1ECS Piston pump PV040 series imported with original packaging Parker
PV040R1E1CDNMR1+PV040R1E Piston pump PV040 series imported with original packaging Parker
PV040R1E1CDWUPR+PV040R1E Piston pump PV040 series imported with original packaging Parker
PV040R1K1AYNECCX5825+PGP Piston pump PV040 series imported with original packaging Parker
PV040R1K1AYNMMC+PGP511A0 Piston pump PV040 series imported with original packaging Parker