| Maximum rotational speed | 7018 ACD/P4AH1 |
| Drive Power | 140x90x24 |
| Pilot Pressure | 140 |
| Maximum Permissible Speed (limit Speed) | 90 |
| Weight (approx.) | 24 |
| Pressurefree Operation | 90 mm |
| Voltage | 140 mm |
| Control Pressure Measurement | 24 mm |
| Drive Speed | 105.4 mm |
| Sequence Valve | 105.4 mm |
| Maximum angular acceleration | 124.6 mm |
| Flow | 0.5 mm |
| Maximum Torque | 6.85 mm |
| Torque | 1.5 mm |
| Moment of inertia rotary group | 1 mm |
| Load Pressure | 39 mm |
| Nominal Resistance | 97 mm |
| Displacement, geometric, per revolution | 97 mm |
| Maximum Axial Force At Standstill | 133 mm |
| Power | 136 mm |
| Determining Operating Characteristics | 1.5 mm |
| Control Fluid Drain | 1 mm |
| Case volume | 108.7 mm |
| Rotary stiffness | 74.1 kN |
| Maximum Permissible Pilot Pressure | 72 kN |
| Rate Of Pressure Change | 2.8 kN |
| Maximum Volume Flow | 8500 r/min |
| Limiting speed for oil lubrication | 13000 mm/min |
| Ball - Dw | 15.875 mm |
| Ball - z | 20 |
| Gref | 15 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 460 N |
| Preload class B - GB | 920 N |
| Preload class C - GC | 1840 N |
| Preload class D - GD | 3680 N |
| Calculation factor - f | 1.14 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.02 |
| Calculation factor - f2C | 1.05 |
| Calculation factor - f2D | 1.08 |
| Calculation factor - fHC | 1 |
| Preload class A | 245 N/micron |
| Preload class B | 321 N/micron |
| Preload class C | 425 N/micron |
| Preload class D | 575 N/micron |
| d1 | 105.4 mm |
| d2 | 105.4 mm |
| D1 | 124.6 mm |
| C1 | 6.85 mm |
| r1,2 min. | 1.5 mm |
| r3,4 min. | 1 mm |
| da min. | 97 mm |
| db min. | 97 mm |
| Da max. | 133 mm |
| Db max. | 136 mm |
| ra max. | 1.5 mm |
| rb max. | 1 mm |
| dn | 108.7 mm |
| Basic dynamic load rating C | 74.1 kN |
| Basic static load rating C0 | 72 kN |
| Fatigue load limit Pu | 2.85 kN |
| Attainable speed for grease lubrication | 8500 r/min |
| Attainable speed for oil-air lubrication | 13000 r/min |
| Ball diameter Dw | 15.875 mm |
| Number of balls z | 20 |
| Reference grease quantity Gref | 15 cm³ |
| Preload class A GA | 460 N |
| Static axial stiffness, preload class A | 245 N/µm |
| Preload class B GB | 920 N |
| Static axial stiffness, preload class B | 321 N/µm |
| Preload class C GC | 1840 N |
| Static axial stiffness, preload class C | 425 N/µm |
| Preload class D GD | 3680 N |
| Static axial stiffness, preload class D | 575 N/µm |
| Calculation factor f | 1.14 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.02 |
| Calculation factor f2C | 1.05 |
| Calculation factor f2D | 1.08 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 1.16 kg |
PVQ32-B2R-SE1S-21-CG-30 Vickers Variable piston pumps PVQ Series imported with original packaging
PVQ45AR05AB10A0700000100100CD0A Vickers Variable piston pumps PVQ Series imported with original packaging
PVQ45AR05AA10B181100A100100CD0A Vickers Variable piston pumps PVQ Series imported with original packaging
PVQ45AR02AC10A18000001AA100CD0A Vickers Variable piston pumps PVQ Series imported with original packaging
PVQ45AR02AA10C18000001AA100CD0A Vickers Variable piston pumps PVQ Series imported with original packaging
PVQ45AR02AA10B181100A1AE100CD0A Vickers Variable piston pumps PVQ Series imported with original packaging