| Displacement, geometric, per revolution | 708 ACE/P4AH |
| Weight (approx.) | 22x8x7 |
| Control Pressure Measurement | 22 |
| Maximum Axial Force At Standstill | 8 |
| Pilot Pressure | 7 |
| Flow | 8 mm |
| Nominal Resistance | 22 mm |
| Voltage | 7 mm |
| Load Pressure | 12.1 mm |
| Determining Operating Characteristics | 11.5 mm |
| Pressurefree Operation | 17.9 mm |
| Moment of inertia rotary group | 0.5 mm |
| Maximum Volume Flow | 4.25 mm |
| Control Fluid Drain | 0.3 mm |
| Rate Of Pressure Change | 0.15 mm |
| Maximum Permissible Speed (limit Speed) | 7.1 mm |
| Drive Speed | 10 mm |
| Drive Power | 10 mm |
| Maximum Permissible Pilot Pressure | 20 mm |
| Maximum angular acceleration | 20.6 mm |
| Maximum Torque | 0.3 mm |
| Power | 0.15 mm |
| Sequence Valve | 13.3 mm |
| Torque | 2.3 kN |
| Rotary stiffness | 0.765 kN |
| Maximum rotational speed | 0.032 kN |
| Case volume | 98000 r/min |
| Limiting speed for oil lubrication | 150000 mm/min |
| Ball - Dw | 3.969 mm |
| Ball - z | 8 |
| Gref | 0.17 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 20 N |
| Preload class B - GB | 60 N |
| Preload class C - GC | 120 N |
| Calculation factor - f | 1.02 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.06 |
| Calculation factor - fHC | 1 |
| Preload class A | 23 N/micron |
| Preload class B | 34 N/micron |
| Preload class C | 45 N/micron |
| d1 | 12.1 mm |
| d2 | 11.5 mm |
| D1 | 17.9 mm |
| C1 | 4.25 mm |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.15 mm |
| da min. | 10 mm |
| db min. | 10 mm |
| Da max. | 20 mm |
| Db max. | 20.6 mm |
| ra max. | 0.3 mm |
| rb max. | 0.15 mm |
| dn | 13.3 mm |
| Basic dynamic load rating C | 2.29 kN |
| Basic static load rating C0 | 0.765 kN |
| Fatigue load limit Pu | 0.032 kN |
| Attainable speed for grease lubrication | 98000 r/min |
| Attainable speed for oil-air lubrication | 150000 r/min |
| Ball diameter Dw | 3.969 mm |
| Number of balls z | 8 |
| Reference grease quantity Gref | 0.17 cm³ |
| Preload class A GA | 20 N |
| Static axial stiffness, preload class A | 23 N/µm |
| Preload class B GB | 60 N |
| Static axial stiffness, preload class B | 34 N/µm |
| Preload class C GC | 120 N |
| Static axial stiffness, preload class C | 45 N/µm |
| Calculation factor f | 1.02 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.06 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.012 kg |
PV020L1E1T1NMFC imported with original packaging Parker Piston pump PV020 series
PV020L1K1JHNMR1+PV020L1L imported with original packaging Parker Piston pump PV020 series
PV020L1K1T1NELZ+PVAC2MCM imported with original packaging Parker Piston pump PV020 series
PV020R1D3BCNMRZ+PV020R1E imported with original packaging Parker Piston pump PV020 series
PV020R1E1BCNMFC+PV020R1E imported with original packaging Parker Piston pump PV020 series
PV020R1K1AYNMMC+PGP505A0 imported with original packaging Parker Piston pump PV020 series