| Drive Power | 71908 ACE/P4AH1 |
| Displacement, geometric, per revolution | 62x40x12 |
| Maximum rotational speed | 62 |
| Control Fluid Drain | 40 |
| Voltage | 12 |
| Sequence Valve | 40 mm |
| Maximum Permissible Pilot Pressure | 62 mm |
| Control Pressure Measurement | 12 mm |
| Determining Operating Characteristics | 46.5 mm |
| Flow | 44.8 mm |
| Nominal Resistance | 54.15 mm |
| Weight (approx.) | 0.5 mm |
| Rotary stiffness | 3.75 mm |
| Pressurefree Operation | 0.6 mm |
| Rate Of Pressure Change | 0.3 mm |
| Case volume | 18.6 mm |
| Maximum Torque | 43.2 mm |
| Maximum Axial Force At Standstill | 42 mm |
| Pilot Pressure | 58.8 mm |
| Moment of inertia rotary group | 60 mm |
| Maximum angular acceleration | 0.6 mm |
| Drive Speed | 0.3 mm |
| Maximum Permissible Speed (limit Speed) | 48 mm |
| Load Pressure | 9.2 kN |
| Maximum Volume Flow | 5.8 kN |
| Power | 0.245 kN |
| Torque | 28000 r/min |
| Limiting speed for oil lubrication | 44000 mm/min |
| Ball - Dw | 6.35 mm |
| Ball - z | 19 |
| Gref | 1.4 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 84 N |
| Preload class B - GB | 250 N |
| Preload class C - GC | 505 N |
| Calculation factor - f | 1.05 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.04 |
| Calculation factor - f2C | 1.07 |
| Calculation factor - fHC | 1 |
| Preload class A | 78 N/micron |
| Preload class B | 117 N/micron |
| Preload class C | 153 N/micron |
| d1 | 46.5 mm |
| d2 | 44.8 mm |
| D1 | 54.15 mm |
| C1 | 3.75 mm |
| r1,2 min. | 0.6 mm |
| r3,4 min. | 0.3 mm |
| da min. | 43.2 mm |
| db min. | 42 mm |
| Da max. | 58.8 mm |
| Db max. | 60 mm |
| ra max. | 0.6 mm |
| rb max. | 0.3 mm |
| dn | 48 mm |
| Basic dynamic load rating C | 9.23 kN |
| Basic static load rating C0 | 5.85 kN |
| Fatigue load limit Pu | 0.245 kN |
| Attainable speed for grease lubrication | 28000 r/min |
| Attainable speed for oil-air lubrication | 44000 r/min |
| Ball diameter Dw | 6.35 mm |
| Number of balls z | 19 |
| Reference grease quantity Gref | 1.4 cm³ |
| Preload class A GA | 84 N |
| Static axial stiffness, preload class A | 78 N/µm |
| Preload class B GB | 250 N |
| Static axial stiffness, preload class B | 117 N/µm |
| Preload class C GC | 505 N |
| Static axial stiffness, preload class C | 153 N/µm |
| Calculation factor f | 1.05 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.04 |
| Calculation factor f2C | 1.07 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.1 kg |
PV092l1D1T1NFTP PV092 series Piston pump imported with original packaging Parker
PV092R2E1T1E000X5892 PV092 series Piston pump imported with original packaging Parker
PV092R2E1C1E000X5892 PV092 series Piston pump imported with original packaging Parker
PV092R1L4T1NUPPX5935 PV092 series Piston pump imported with original packaging Parker
PV092R1L4T1NUPPX5897 PV092 series Piston pump imported with original packaging Parker
PV092R1L4T1NUPEX5897 PV092 series Piston pump imported with original packaging Parker