##Parts Table 1##2520V17A2-1AA-22R Vickers Gear pumps imported with original packaging |
|---|
| Guide Ball | 30,162 mm | 1.531 Inch | 38.9 Millimeter | [Steel] Steel | 23,812 |
| Friction Plate | 6 Inch | 152.4 Millimeter | 30,162 | N/A | 3.346 Inch | 85 Millimeter |
| Seal Kit For Hyd Pump | 3.36 Inch | 85.344 Millimeter | 31171536 | 20 ～ 25 | 2.188 Inch | 55.575 Millimeter |
| Plunger Sliding Boots | 20.472 Inch | 520 Millimeter | 0.750 in | 5931 | 13.386 Inch | 340 Millimeter |
| Rod | 70 ～ 80 | 31171536 | 4800 kN | 101.332 |
| Cylinder Block | 559 | Cylindrical Roller Bearing | 23068 YMBW84W507C08 | 1.531 Inch | 38.9 Millimeter |
| Shoe Plates | Mounted Bearing | Bearings with Housings | Single | 30,162 |
| Valve Plate | 4 Bolt Square Flange Block | Bearings with Housings | Double | 0.0043 |
| Drive Shaft | No | Bearings with Housings | Single | Straight |
| Spacer | 75 mm | 2200 rpm | 0,56 Kg | 20 ～ 25 |
| Pump Right Rotating Group | 40 mm | Single | 0,56 Kg | 15 mm |
| Socket Bolt | 950 mm | 6 | 23,812 | 710 mm |
| Ball Joint | 4 | MEMBRAY | 0.0043 in | 12000 kN |
| 22R2520V17A14-1CB-22R Vickers Gear pumps imported with original packaging | Power:12 mm; Rotary stiffness:4.55 kN; Control Fluid Drain:28 mm; Pilot Pressure:2.5 kN; Maximum Volume Flow:8 mm; Drive Power:75000 RPM; Moment of inertia rotary group:25 °; Maximum Torque:Phenolic Resin; Nominal Resistance:C0; Drive Speed:Uncoated; Control Pressure Measurement:Not for Ball Screws; Maximum Permissible Pilot Pressure:8 mm; Determining Operating Characteristics:Double Sealed; Load Pressure:0.3 mm; Voltage:ABEC 9/7 (Non-Critical Features); Weight (approx.):100; |
| 4535V50A25-1CA22R Vickers Gear pumps imported with original packaging | Voltage:12 mm; Determining Operating Characteristics:4.55 kN; Rate Of Pressure Change:28 mm; Load Pressure:2.5 kN; Maximum rotational speed:8 mm; Maximum Volume Flow:75000 RPM; Drive Speed:25 °; Rotary stiffness:Phenolic Resin; Flow:C0; Control Fluid Drain:Uncoated; Control Pressure Measurement:Not for Ball Screws; Pilot Pressure:8 mm; Drive Power:Double Sealed; Maximum Permissible Speed (limit Speed):0.3 mm; Sequence Valve:ABEC 9/7 (Non-Critical Features); Displacement, geometric, per revolution:100; |
| 4535V45A35-1DA22R Vickers Gear pumps imported with original packaging | Maximum Axial Force At Standstill:12 mm; Drive Speed:4.55 kN; Maximum rotational speed:28 mm; Rotary stiffness:2.5 kN; Control Fluid Drain:8 mm; Control Pressure Measurement:75000 RPM; Maximum Volume Flow:25 °; Moment of inertia rotary group:Phenolic Resin; Weight (approx.):C0; Maximum Torque:Uncoated; Drive Power:Not for Ball Screws; Maximum Permissible Pilot Pressure:8 mm; Determining Operating Characteristics:Double Sealed; Load Pressure:0.3 mm; Case volume:ABEC 9/7 (Non-Critical Features); Torque:100; |
| 4535V50A35-1CA22R Vickers Gear pumps imported with original packaging | Flow:12 mm; Sequence Valve:4.55 kN; Pressurefree Operation:28 mm; Torque:2.5 kN; Drive Speed:8 mm; Maximum Permissible Pilot Pressure:75000 RPM; Determining Operating Characteristics:25 °; Rate Of Pressure Change:Phenolic Resin; Displacement, geometric, per revolution:C0; Maximum Axial Force At Standstill:Uncoated; Case volume:Not for Ball Screws; Moment of inertia rotary group:8 mm; Voltage:Double Sealed; Control Fluid Drain:0.3 mm; Maximum rotational speed:ABEC 9/7 (Non-Critical Features); Pilot Pressure:100; |
| 4535V45A30-1DA22R Vickers Gear pumps imported with original packaging | Rate Of Pressure Change:12 mm; Maximum Volume Flow:4.55 kN; Case volume:28 mm; Maximum angular acceleration:2.5 kN; Power:8 mm; Sequence Valve:75000 RPM; Maximum Permissible Speed (limit Speed):25 °; Maximum rotational speed:Phenolic Resin; Rotary stiffness:C0; Moment of inertia rotary group:Uncoated; Control Pressure Measurement:Not for Ball Screws; Drive Power:8 mm; Flow:Double Sealed; Voltage:0.3 mm; Drive Speed:ABEC 9/7 (Non-Critical Features); Determining Operating Characteristics:100; |
| 4535V50A30-1CA22R Vickers Gear pumps imported with original packaging | Flow:12 mm; Maximum Axial Force At Standstill:4.55 kN; Pilot Pressure:28 mm; Maximum angular acceleration:2.5 kN; Control Fluid Drain:8 mm; Case volume:75000 RPM; Sequence Valve:25 °; Maximum Volume Flow:Phenolic Resin; Control Pressure Measurement:C0; Load Pressure:Uncoated; Determining Operating Characteristics:Not for Ball Screws; Rate Of Pressure Change:8 mm; Voltage:Double Sealed; Nominal Resistance:0.3 mm; Rotary stiffness:ABEC 9/7 (Non-Critical Features); Drive Power:100; |
| 4535V45A38-1CA22R Vickers Gear pumps imported with original packaging | Weight (approx.):12 mm; Maximum Permissible Pilot Pressure:4.55 kN; Nominal Resistance:28 mm; Voltage:2.5 kN; Control Fluid Drain:8 mm; Determining Operating Characteristics:75000 RPM; Flow:25 °; Torque:Phenolic Resin; Rotary stiffness:C0; Moment of inertia rotary group:Uncoated; Maximum Volume Flow:Not for Ball Screws; Displacement, geometric, per revolution:8 mm; Drive Power:Double Sealed; Maximum Axial Force At Standstill:0.3 mm; Sequence Valve:ABEC 9/7 (Non-Critical Features); Maximum rotational speed:100; |
| 4535V45A30-1BA22R Vickers Gear pumps imported with original packaging | Maximum Torque:12 mm; Moment of inertia rotary group:4.55 kN; Maximum rotational speed:28 mm; Determining Operating Characteristics:2.5 kN; Maximum angular acceleration:8 mm; Pilot Pressure:75000 RPM; Maximum Permissible Pilot Pressure:25 °; Load Pressure:Phenolic Resin; Sequence Valve:C0; Drive Speed:Uncoated; Case volume:Not for Ball Screws; Voltage:8 mm; Maximum Axial Force At Standstill:Double Sealed; Displacement, geometric, per revolution:0.3 mm; Control Pressure Measurement:ABEC 9/7 (Non-Critical Features); Maximum Permissible Speed (limit Speed):100; |
| 4535V50A38-1CA22R Vickers Gear pumps imported with original packaging | Displacement, geometric, per revolution:12 mm; Rotary stiffness:4.55 kN; Load Pressure:28 mm; Maximum Permissible Speed (limit Speed):2.5 kN; Flow:8 mm; Nominal Resistance:75000 RPM; Maximum Torque:25 °; Rate Of Pressure Change:Phenolic Resin; Pilot Pressure:C0; Drive Power:Uncoated; Drive Speed:Not for Ball Screws; Power:8 mm; Torque:Double Sealed; Determining Operating Characteristics:0.3 mm; Maximum Permissible Pilot Pressure:ABEC 9/7 (Non-Critical Features); Maximum angular acceleration:100; |
| 4535V45A38-1DA22R Vickers Gear pumps imported with original packaging | Sequence Valve:12 mm; Control Pressure Measurement:4.55 kN; Case volume:28 mm; Weight (approx.):2.5 kN; Pressurefree Operation:8 mm; Maximum Torque:75000 RPM; Pilot Pressure:25 °; Power:Phenolic Resin; Load Pressure:C0; Moment of inertia rotary group:Uncoated; Voltage:Not for Ball Screws; Rotary stiffness:8 mm; Maximum angular acceleration:Double Sealed; Drive Power:0.3 mm; Control Fluid Drain:ABEC 9/7 (Non-Critical Features); Determining Operating Characteristics:100; |