##Parts Table 1##Vickers Gear pumps 26004-RZB imported with original packaging Vickers Gear pumps |
|---|
| Gear Pump | 63,5 mm | 65,1 mm | 304 Stainless Steel | 6,9 Kg |
| Bushing Spring | 1.625 Inch | 41.275 Millimeter | With cast iron cover/Through type | 10 | 2.313 |
| Shafts | Ambient | 131170 | 1.5625 in | 4500 fpm |
| Saddle Bearing | 40 kN | Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che | Round | 6.05 |
| Bearing Plate | 1.8750 in | 13.79 | Lubrication Fitting | 6200 |
| Snap Ring | 1.8750 in | 4.5625 in | 6.1875 in | 16.115 |
| Ball Guides | 119 kN | 203.4 N·m | 2.4410 in | 0.241 lb |
| Barrel Washer | http://www.dodge-pt.com | 114.3 mm | With cast iron cover/Through type | Standard Duty |
| Set Plate | 80 | 120 | ISO-GARD® Small Cross-Section Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" Flange ISO-GARD® Small Cross-Section Design Filled PTFE Rotor and Stator FK | 1.7719 in |
| Press Pin | Thick Wall | 0.313 Inch | 7.95 Millimeter | 62 | 131170 |
| Guide Ball | 10 mm | 14000 r/min | 12 mm | 25,4 mm |
| Bearings | 34 mm | 37 mm | 62 mm | 62 |
| Block Cylinder | 12 | 4500 fpm | 21 mm | Non-Expansion Bearing (Fixed) |
| Skeleton Oil Seal | Labyrinth | ISO-GARD® Small Cross-Section Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" Flange ISO-GARD® Small Cross-Section Design Filled PTFE Rotor and Stator FK | 2.0313 in | -22 to 400°F |
| Vickers Gear pumps 26013-RZF imported with original packaging Vickers Gear pumps | Drive Speed:20 mm; Maximum Permissible Pilot Pressure:Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Control Fluid Drain:28 mm; Determining Operating Characteristics:Dry 0.50;Periodic lubrication 1.0 m/s; Maximum Axial Force At Standstill:50 mm; Displacement, geometric, per revolution:2000; Torque:Plain Sleeve; Case volume:RoHS; Load Pressure:2000; Pressurefree Operation:CBB; Rotary stiffness:-40 to +248 °F; Voltage:Lead Free; Sequence Valve:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 26013-RZE imported with original packaging Vickers Gear pumps | Maximum Axial Force At Standstill:20 mm; Maximum Permissible Speed (limit Speed):Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Control Pressure Measurement:28 mm; Sequence Valve:Dry 0.50;Periodic lubrication 1.0 m/s; Control Fluid Drain:50 mm; Rotary stiffness:2000; Maximum Permissible Pilot Pressure:Plain Sleeve; Torque:RoHS; Case volume:2000; Maximum Volume Flow:CBB; Load Pressure:-40 to +248 °F; Pilot Pressure:Lead Free; Pressurefree Operation:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 26013-RZC imported with original packaging Vickers Gear pumps | Drive Power:20 mm; Maximum rotational speed:Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Moment of inertia rotary group:28 mm; Rate Of Pressure Change:Dry 0.50;Periodic lubrication 1.0 m/s; Displacement, geometric, per revolution:50 mm; Voltage:2000; Maximum Permissible Pilot Pressure:Plain Sleeve; Control Fluid Drain:RoHS; Control Pressure Measurement:2000; Flow:CBB; Determining Operating Characteristics:-40 to +248 °F; Nominal Resistance:Lead Free; Maximum Permissible Speed (limit Speed):Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 26013-LZC imported with original packaging Vickers Gear pumps | Maximum Permissible Pilot Pressure:20 mm; Weight (approx.):Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Flow:28 mm; Pilot Pressure:Dry 0.50;Periodic lubrication 1.0 m/s; Control Pressure Measurement:50 mm; Drive Power:2000; Rate Of Pressure Change:Plain Sleeve; Power:RoHS; Voltage:2000; Maximum Torque:CBB; Maximum angular acceleration:-40 to +248 °F; Maximum Volume Flow:Lead Free; Control Fluid Drain:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 26013-LZE imported with original packaging Vickers Gear pumps | Torque:20 mm; Case volume:Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Maximum Permissible Speed (limit Speed):28 mm; Moment of inertia rotary group:Dry 0.50;Periodic lubrication 1.0 m/s; Control Pressure Measurement:50 mm; Power:2000; Pilot Pressure:Plain Sleeve; Maximum Axial Force At Standstill:RoHS; Pressurefree Operation:2000; Rotary stiffness:CBB; Rate Of Pressure Change:-40 to +248 °F; Maximum rotational speed:Lead Free; Maximum Volume Flow:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 26013-LZF imported with original packaging Vickers Gear pumps | Maximum Permissible Pilot Pressure:20 mm; Voltage:Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Load Pressure:28 mm; Control Fluid Drain:Dry 0.50;Periodic lubrication 1.0 m/s; Determining Operating Characteristics:50 mm; Maximum angular acceleration:2000; Flow:Plain Sleeve; Weight (approx.):RoHS; Maximum Volume Flow:2000; Sequence Valve:CBB; Maximum Torque:-40 to +248 °F; Control Pressure Measurement:Lead Free; Pilot Pressure:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 25500-RSA imported with original packaging Vickers Gear pumps | Maximum Permissible Pilot Pressure:20 mm; Control Fluid Drain:Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Maximum Permissible Speed (limit Speed):28 mm; Moment of inertia rotary group:Dry 0.50;Periodic lubrication 1.0 m/s; Maximum Axial Force At Standstill:50 mm; Control Pressure Measurement:2000; Torque:Plain Sleeve; Maximum Volume Flow:RoHS; Voltage:2000; Determining Operating Characteristics:CBB; Load Pressure:-40 to +248 °F; Sequence Valve:Lead Free; Case volume:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 26013-LZD imported with original packaging Vickers Gear pumps | Case volume:20 mm; Maximum Volume Flow:Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Load Pressure:28 mm; Rate Of Pressure Change:Dry 0.50;Periodic lubrication 1.0 m/s; Pilot Pressure:50 mm; Maximum angular acceleration:2000; Control Pressure Measurement:Plain Sleeve; Weight (approx.):RoHS; Rotary stiffness:2000; Pressurefree Operation:CBB; Maximum Permissible Pilot Pressure:-40 to +248 °F; Control Fluid Drain:Lead Free; Drive Speed:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 26013-RZD imported with original packaging Vickers Gear pumps | Maximum angular acceleration:20 mm; Maximum Permissible Speed (limit Speed):Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Drive Speed:28 mm; Control Pressure Measurement:Dry 0.50;Periodic lubrication 1.0 m/s; Torque:50 mm; Pressurefree Operation:2000; Nominal Resistance:Plain Sleeve; Maximum Torque:RoHS; Flow:2000; Power:CBB; Rate Of Pressure Change:-40 to +248 °F; Control Fluid Drain:Lead Free; Case volume:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |
| Vickers Gear pumps 26013-LZB imported with original packaging Vickers Gear pumps | Maximum Torque:20 mm; Power:Dry 24.5 N/mm2;Dry Static 73.5 N/mm2;Periodic Lubrication 49 N/mm2;Periodic Lube Static; Displacement, geometric, per revolution:28 mm; Rate Of Pressure Change:Dry 0.50;Periodic lubrication 1.0 m/s; Maximum Permissible Pilot Pressure:50 mm; Maximum Permissible Speed (limit Speed):2000; Rotary stiffness:Plain Sleeve; Control Pressure Measurement:RoHS; Drive Speed:2000; Weight (approx.):CBB; Sequence Valve:-40 to +248 °F; Drive Power:Lead Free; Voltage:Dry 1.63, Periodic lubrication 2.45 N/mm2 x m/s; |