##Parts Table 1## A56-F-R-04-B-S-K-32 imported with original packaging Yuken Pistonp Pump A Series |
|---|
| Rotary stiffness | 140 mm | 250 mm | 18,0 Kg | UE-1812 |
| Maximum Permissible Pilot Pressure | 55 mm | 80 mm | 0.9 | 1.063 Inch | 27 Millimeter |
| Maximum Permissible Speed (limit Speed) | 2.438 Inch | 61.925 Millimeter | 2.58 cm3 | 10.442 | N/A |
| Determining Operating Characteristics | Unit Only | 21.772 | 21.772 | N/A |
| Case volume | 45 mm | Take Up Bearing Only | 2.9 | N/A |
| Pilot Pressure | 9.449 Inch | 240 Millimeter | 11.811 Inch | 300 Millimeter | 4.35 | N/A |
| Pressurefree Operation | 64.8 mm | Full Complement | 2 Rib Inner Ring | 1 Rib Outer Ring with Retaining Ring | 0.003 | N/A |
| Maximum Volume Flow | 55 mm | 182.12 mm | 58.2 | N/A |
| Drive Power | NCF-1848V C/3 | 190 mm | 169.3 | Unit Only |
| Voltage | 35 mm | 39 mm | 145 mm | 73.2 mm |
| Drive Speed | 1.26 Inch | 32 Millimeter | 250 mm | Complete with Outer and Inner Ring | 7 ° |
| A70-F-R-01-K-S-60 imported with original packaging Yuken Pistonp Pump A Series | Case volume:Single Row Ball Bearings; Determining Operating Characteristics:0.0; Displacement, geometric, per revolution:KOYO; Pilot Pressure:N/A; Maximum Permissible Pilot Pressure:0.019; Maximum rotational speed:B00308; Drive Speed:2 Seals; Rotary stiffness:ABEC 1 | ISO P0; Drive Power:No; Flow:Ball Bearing; Control Fluid Drain:No; Sequence Valve:No; Control Pressure Measurement:Steel; Pressurefree Operation:Non-Contact Seal; Nominal Resistance:C0-Medium; Power:Metric; Maximum Permissible Speed (limit Speed):20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Maximum Volume Flow:Single Row Ball Bearing; Weight (approx.):31171504; Torque:8482.10.50.68; Load Pressure:Bearing; Voltage:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A145-F-R-01-K-S-60 imported with original packaging Yuken Pistonp Pump A Series | Pilot Pressure:Single Row Ball Bearings; Maximum Axial Force At Standstill:0.0; Pressurefree Operation:KOYO; Maximum rotational speed:N/A; Flow:0.019; Load Pressure:B00308; Rate Of Pressure Change:2 Seals; Nominal Resistance:ABEC 1 | ISO P0; Displacement, geometric, per revolution:No; Rotary stiffness:Ball Bearing; Drive Power:No; Maximum Permissible Pilot Pressure:No; Maximum Permissible Speed (limit Speed):Steel; Control Pressure Measurement:Non-Contact Seal; Maximum Volume Flow:C0-Medium; Sequence Valve:Metric; Voltage:20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Drive Speed:Single Row Ball Bearing; Torque:31171504; Case volume:8482.10.50.68; Control Fluid Drain:Bearing; Maximum angular acceleration:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A16-F-R-01-C-K-32 imported with original packaging Yuken Pistonp Pump A Series | Weight (approx.):Single Row Ball Bearings; Torque:0.0; Nominal Resistance:KOYO; Moment of inertia rotary group:N/A; Determining Operating Characteristics:0.019; Flow:B00308; Maximum Torque:2 Seals; Maximum Volume Flow:ABEC 1 | ISO P0; Maximum Permissible Speed (limit Speed):No; Pressurefree Operation:Ball Bearing; Maximum angular acceleration:No; Drive Power:No; Voltage:Steel; Power:Non-Contact Seal; Control Pressure Measurement:C0-Medium; Maximum rotational speed:Metric; Sequence Valve:20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Maximum Axial Force At Standstill:Single Row Ball Bearing; Rate Of Pressure Change:31171504; Control Fluid Drain:8482.10.50.68; Displacement, geometric, per revolution:Bearing; Pilot Pressure:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A10-FR01H-12 imported with original packaging Yuken Pistonp Pump A Series | Maximum Permissible Speed (limit Speed):Single Row Ball Bearings; Sequence Valve:0.0; Maximum Axial Force At Standstill:KOYO; Load Pressure:N/A; Pilot Pressure:0.019; Rate Of Pressure Change:B00308; Displacement, geometric, per revolution:2 Seals; Nominal Resistance:ABEC 1 | ISO P0; Control Pressure Measurement:No; Moment of inertia rotary group:Ball Bearing; Maximum rotational speed:No; Case volume:No; Flow:Steel; Torque:Non-Contact Seal; Drive Power:C0-Medium; Drive Speed:Metric; Pressurefree Operation:20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Weight (approx.):Single Row Ball Bearing; Voltage:31171504; Control Fluid Drain:8482.10.50.68; Maximum Volume Flow:Bearing; Rotary stiffness:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A16-L-R-04-H-S-K-32 imported with original packaging Yuken Pistonp Pump A Series | Rotary stiffness:Single Row Ball Bearings; Pilot Pressure:0.0; Voltage:KOYO; Drive Speed:N/A; Maximum Axial Force At Standstill:0.019; Rate Of Pressure Change:B00308; Maximum Torque:2 Seals; Determining Operating Characteristics:ABEC 1 | ISO P0; Sequence Valve:No; Maximum Permissible Speed (limit Speed):Ball Bearing; Displacement, geometric, per revolution:No; Moment of inertia rotary group:No; Power:Steel; Maximum Volume Flow:Non-Contact Seal; Weight (approx.):C0-Medium; Load Pressure:Metric; Maximum rotational speed:20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Flow:Single Row Ball Bearing; Nominal Resistance:31171504; Pressurefree Operation:8482.10.50.68; Maximum angular acceleration:Bearing; Control Pressure Measurement:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A10-FR01C-12 imported with original packaging Yuken Pistonp Pump A Series | Drive Power:Single Row Ball Bearings; Load Pressure:0.0; Moment of inertia rotary group:KOYO; Sequence Valve:N/A; Displacement, geometric, per revolution:0.019; Control Fluid Drain:B00308; Drive Speed:2 Seals; Pilot Pressure:ABEC 1 | ISO P0; Maximum angular acceleration:No; Maximum Axial Force At Standstill:Ball Bearing; Control Pressure Measurement:No; Maximum Permissible Speed (limit Speed):No; Rate Of Pressure Change:Steel; Voltage:Non-Contact Seal; Rotary stiffness:C0-Medium; Flow:Metric; Torque:20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Maximum Torque:Single Row Ball Bearing; Maximum Permissible Pilot Pressure:31171504; Case volume:8482.10.50.68; Determining Operating Characteristics:Bearing; Maximum rotational speed:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A10-FR01B-12 imported with original packaging Yuken Pistonp Pump A Series | Maximum rotational speed:Single Row Ball Bearings; Weight (approx.):0.0; Drive Speed:KOYO; Displacement, geometric, per revolution:N/A; Moment of inertia rotary group:0.019; Maximum Axial Force At Standstill:B00308; Maximum Permissible Speed (limit Speed):2 Seals; Load Pressure:ABEC 1 | ISO P0; Maximum angular acceleration:No; Determining Operating Characteristics:Ball Bearing; Nominal Resistance:No; Drive Power:No; Maximum Permissible Pilot Pressure:Steel; Case volume:Non-Contact Seal; Control Fluid Drain:C0-Medium; Torque:Metric; Rate Of Pressure Change:20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Rotary stiffness:Single Row Ball Bearing; Flow:31171504; Power:8482.10.50.68; Voltage:Bearing; Control Pressure Measurement:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A90-F-R-01-K-S-60 imported with original packaging Yuken Pistonp Pump A Series | Pilot Pressure:Single Row Ball Bearings; Maximum Permissible Pilot Pressure:0.0; Drive Speed:KOYO; Displacement, geometric, per revolution:N/A; Maximum rotational speed:0.019; Maximum Volume Flow:B00308; Rate Of Pressure Change:2 Seals; Voltage:ABEC 1 | ISO P0; Rotary stiffness:No; Torque:Ball Bearing; Maximum Axial Force At Standstill:No; Load Pressure:No; Maximum Permissible Speed (limit Speed):Steel; Maximum Torque:Non-Contact Seal; Drive Power:C0-Medium; Control Pressure Measurement:Metric; Weight (approx.):20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Determining Operating Characteristics:Single Row Ball Bearing; Pressurefree Operation:31171504; Case volume:8482.10.50.68; Flow:Bearing; Moment of inertia rotary group:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A16-F-L-04-H-S-K-32 imported with original packaging Yuken Pistonp Pump A Series | Case volume:Single Row Ball Bearings; Maximum Torque:0.0; Power:KOYO; Flow:N/A; Sequence Valve:0.019; Voltage:B00308; Displacement, geometric, per revolution:2 Seals; Maximum rotational speed:ABEC 1 | ISO P0; Moment of inertia rotary group:No; Determining Operating Characteristics:Ball Bearing; Nominal Resistance:No; Maximum angular acceleration:No; Rotary stiffness:Steel; Drive Power:Non-Contact Seal; Control Pressure Measurement:C0-Medium; Maximum Permissible Speed (limit Speed):Metric; Maximum Permissible Pilot Pressure:20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Control Fluid Drain:Single Row Ball Bearing; Weight (approx.):31171504; Maximum Axial Force At Standstill:8482.10.50.68; Pilot Pressure:Bearing; Maximum Volume Flow:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |
| A16-L-L-04-H-S-K-32 imported with original packaging Yuken Pistonp Pump A Series | Drive Speed:Single Row Ball Bearings; Maximum rotational speed:0.0; Rotary stiffness:KOYO; Drive Power:N/A; Nominal Resistance:0.019; Sequence Valve:B00308; Maximum Permissible Pilot Pressure:2 Seals; Maximum Axial Force At Standstill:ABEC 1 | ISO P0; Power:No; Rate Of Pressure Change:Ball Bearing; Pressurefree Operation:No; Torque:No; Maximum angular acceleration:Steel; Displacement, geometric, per revolution:Non-Contact Seal; Control Pressure Measurement:C0-Medium; Maximum Permissible Speed (limit Speed):Metric; Flow:20MM Bore; 32MM Outside Diameter; 7MM Outer Race Diameter; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Voltage:Single Row Ball Bearing; Weight (approx.):31171504; Moment of inertia rotary group:8482.10.50.68; Load Pressure:Bearing; Determining Operating Characteristics:Ball; Manufacturer Item Number:6804 2RU; Weight / LBS:0.043; D:1.26 Inch | 32 Millimeter; Outer Race Width:0.276 Inch | 7 Millimeter; d:0.787 Inch | 20 Millimeter; Bearing No.:6804 2RU; d:20; D:32; B:7; r(min):0.3; Cr:5.00; C0r:2.45; Cu:0.100; f0:15.5; Grease lub.:21000; da(min):22; da(max):22.5; Da(max):30; ra(max):0.3; (Refer.)Mass(Open type)(kg):0.018; |